Lithium Complex 125K
DISCRIPTION
Product Data
This is a Lithium Complex soap based, premium quality multipurpose grease. It is manufactured under strictly controlled conditions using premium quality base oils & is fortified with extreme pressure (EP) additives & corrosion & oxidation inhibitors.
This product has a durable film & superior surface adhesion. This grease also has good shear stability & good roll stability making it a very versatile solution, with a wide variety of potential applications.
This grease is suitable for applications with an operating temperature range of
-20 to +180 0C under routine service.
This product can be recommended for a service life of 125,000 Km
Applications
- Automotive wheel bearings, chassis, steering components etc.
- Earthmoving, mining and quarrying equipment under moderate to heavy loads
- Farm equipment like tractors, harvesters, implements etc
- Universal joints bearings, journal bearings etc
Main Benefits
- Excellent Oxidation & Heat stability
- Superior boundary film strength leading to reduction in maintenance costs and downtime
- Superior resistance to water washout
- Superior Roll & Shear stability
- Excellent retention of structure under extreme operating conditions and under storage
- Superior protection against rust and corrosion
Performance standards
Exceeds the performance requirements of
- IS 12203
Product : Lithium Complex 125K
Typical Performance Data
Sr.No. | Test | Control Range / Limit | Typical | Test Method |
1 | Penetration: |
|
| ASTM D 217-02 |
| Work 60X | 220 – 250 | 234 |
|
| Work 100,000X | +30 | +25 |
|
2 | NLGI Grade | 3 | 3 |
|
3 | Drop Point (°C) | >250 | >250 | ASTM D 566 |
4 | EMCOR Rust Prevention | 0-0 Pass | 0-0 Pass | IP 220/93 |
5 | Appearance | Light Brown | Light Brown | Visual |
6 | Soap Type | Lithium Complex | Lithium Complex |
|
7 | Base oil Viscosity (KV@40°C),cSt | 240 – 260 | 250 | ASTM D 445 |
| Base Oil Type | Semi Synthetic | Semi Synthetic |
|
8 | Oil separation 40°C for 168 Hrs (% loss) | 5 Max | <1.5 | IS 1448 |
9 | Resistance to water washout (% loss) | 10 Max | <4 | ASTM D 1264 |
10 | Oxidation Stability 100 hrs @ 100C, drop in pressure, Psi | 6 Max | <4 | ASTM D 942 |
11 | Copper corrosion | 1b Max | 1b | ASTM D 4048 |
12 | 4 Ball Weld Load (Kg) | 315 Min | 315 | ASTM D 2596 |
13 | 4 Ball Wear Scar mm | 0.6 Max | 0.4 | ASTM D 2266 |
14 | Wheel bearing Life | 100 Hours Min | >125 | ASTM D 3527 |
15 | Roll Stability 16 Hours @80℃ | 25 Max | <20 | ASTM D 1831 |
16 | Wheel bearing Test | Max 5 g | <0.2 | ASTM D 1263 |
17 | Operating Range (℃) | -20 to +180 | -20 to +180 |
|